Serving Market Harborough, Leicester and Kettering with packaging that fits the product, survives the journey and keeps arriving - supplied from Golden Triangle stock.
WSUK's protective packaging reaches Market Harborough from our Lutterworth site, around 25 minutes by road. What arrives is a specified set of materials rather than whatever was nearest the right size - and it keeps arriving, because the reorder point is set against your consumption rather than a guess.
The materials, specified against your SKUs - including the recommendation to drop the sizes that nearly fit and the second tape that is doing the first tape's job.
around 25 minutes by road from Lutterworth, in on A6, A14, A427 and M1 (J20). Reorder points are agreed against your real consumption so the materials turn up before the shelf is empty rather than after somebody notices.
Light manufacturing, distribution and food and drink. The requirement ranges from a few pallets a week to several hundred parcels a day, which is a wide spread of need inside one postcode area.
Industrial Market Harborough is organised around A6, A14, A427 and M1 (J20). Rockingham Road and Riverside Industrial Estate take a large share of the town's outbound volume, with Airfield Business Park and the smaller units across LE16 making up the rest. The businesses there range from single-shift operations despatching a few pallets a week to ecommerce sellers putting out several hundred parcels a day - which is a very wide range of packaging requirement in a small area.
The supply route into Market Harborough runs from our Lutterworth operation, around 25 minutes by road. Holding packaging centrally rather than regionally is what makes the economics work: print plates and cutting forms are spread across a full run, the run is held on racking that already exists, and Market Harborough calls off what it needs. Nobody in Leicestershire has to store six months of board to get a sensible unit price.
The sectors concentrated around Market Harborough - Light manufacturing, distribution and food and drink - produce a wide spread of packaging requirement within a small geography. What they have in common is that very few of them have measured their packs against their carriers' size and weight bands, which is usually the cheapest correction available anywhere in a packaging spend.
The first question for a Market Harborough business losing product in transit is not how much protection to add, it is what is actually breaking it. Impact from a single drop, compression from being stacked, vibration over a long road journey and abrasion inside the pack are four different failures, and the material that solves one is frequently useless against another.
The most useful things a Market Harborough business can send us are damaged items and photographs of them as they arrived, with the packaging still around them where possible. Which face is crushed, where the fill has migrated and how the product broke are what identify the failure. A damage rate on its own tells us there is a problem but not what it is.
For Market Harborough businesses that have grown from pallets into parcels, or the other way round, the packaging usually has not kept up. A parcel network handles goods far more roughly and far less predictably than a pallet journey, so the same product genuinely needs a different pack in each case.
A6, A14, A427 and M1 (J20).
Around 25 minutes from our Lutterworth site.
Light manufacturing, distribution and food and drink.
Estates, districts and neighbouring towns covered by the same Market Harborough delivery pattern:
What Market Harborough gets is a packaging supplier that also packs orders for a living, so the specification is written from the pack bench outward rather than from a catalogue inward.
We are straight with Market Harborough businesses about what is worth changing and what is not. If a standard line does the job, or a substitution would increase damage, we will say so rather than sell it.
Specification first, then a quote against it.
Product, quantities and how it travels from Market Harborough.
Materials and sizes chosen for the product and the journey.
Priced against the specification, with a physical sample on anything bespoke or printed.
Delivered into LE16, with call-off where the quantities suit.
Protective Packaging in Market Harborough at WSUK, answered plainly.
Yes. WSUK provides storage, fulfilment, pick and pack, parcel despatch, transport and returns, so a Market Harborough business can have the packaging sit with the operation that uses it.
Yes - Leicester, Kettering and Lutterworth are all served from the same stock, along with the wider Leicestershire area. A single delivery schedule covers a lot of accounts in the region.
That is what a packaging review is for, and we will not quote you a percentage before looking. It examines materials, storage, transport, labour, damage and waste together and sets the findings out in writing.
Yes, and for printed or bespoke lines it is usually the sensible arrangement. You buy the economic run quantity, we hold it in Midlands warehousing, and you call off into Market Harborough as you need it.
Yes. One standard across a mixed range is over-specified for the robust lines and inadequate for the fragile ones. We specify per SKU group.
Yes, with interleaving and soft-grade materials. Loose fill is often the cause of scuffing on finished goods rather than the cure.
Protective Packaging is one of sixteen packaging services we supply into Market Harborough. Each has a page of its own for the town.
We supply protective packaging throughout the UK from Midlands stock. These are the nearest locations with a page of their own - the full list is on the packaging services hub.
Fifty-nine pages: 58 product ranges across six material families, each with its specification table, plus the postal, retail, industrial, bespoke and sustainable sections and how an enquiry is specified and quoted.
Send us your current line list or a photograph of a typical pack from your Market Harborough operation, and we will tell you what we would change.