Packaging supply to Dunstall Park, Tamworth and across Staffordshire. Cartons specified to the product, protection specified against the failure, consumables resupplied against consumption rather than against a purchase order.
What a unit at Dunstall Park actually needs
Space is usually the binding constraint rather than price. The better buy is almost always the longer run, and the longer run is exactly what a unit with a bench and limited floor has nowhere to put - which is a stockholding problem dressed up as a purchasing one.
What the businesses here share is not what they make but how they buy. Packaging arrives from whoever answered last time, in sizes chosen for a product that has since changed, and nobody holds the whole picture because it comes from several places.
In practice the requirement comes down to a handful of things.
- A short carton range fitted to what actually leaves, rather than the accumulated list.
- Durable labelling and reclosable packs for part-used stock.
- Trade quantities without a minimum on standard lines.
- Postal and parcel formats for the units despatching to consumers.
- One account across outers, protection, print and consumables.
| Business | Despatch pattern | Typical range |
|---|---|---|
| Manufacturer | Pallet and parcel both | Carton ladder plus protective range |
| Distributor | Pallets to a schedule | Pallet consumables and outers |
| Importer | Bulk in, broken cases out | Heavy outers plus a part-case pack |
| Print or signage | Flat and rolled | Book wraps, tubes, board tops |
| Online retailer | Parcels daily | Postal boxes, mailers, void fill, printed tape |
| Light assembly | Low volume, specific | Right-sized cartons, fitted protection |
The businesses in a mixed commercial area and what each tends to order.
Where Dunstall Park sits, and why it matters
Dunstall Park sits within Tamworth's commercial area, in a town where National distribution, logistics and manufacturing dominate. Those sectors fail in different ways in transit, which is why protection is worth specifying against the failure mode rather than buying a general-purpose material and using more of it.
Tamworth sits on M42 (J10), A5, A38 and M6 Toll (T3), and Dunstall Park is placed to use those connections. Deliveries into B77-B79 run from stock held around 40 minutes away at Lutterworth, alongside supply to Lichfield, Cannock and Nuneaton.
The practical constraint at Dunstall Park is usually floor space rather than budget. The quantity that prices well is larger than the quantity a unit can store, and that gap is what holds most businesses on a worse price than they need to be on.
Everything here is supplied through packaging services in Tamworth, and the service pages behind it set out each material range in detail.
The range, in short
A trade account into Dunstall Park covers the whole bench rather than just the boxes.
- Void fill and cushioning - paper fill, air cushion, bubble and loose fill, specified against the failure rather than the shelf. See protective packaging.
- Sustainable options - recyclable corrugated, paper tape and fill, moulded pulp and plastic-free mailers. See sustainable packaging.
- Foam - sheet, convoluted, profiled and pocketed inserts, including anti-static grades. See foam packaging.
- Cartons and cases - single and double wall, postal boxes, heavy duty and triple wall where weight demands it. See packaging supplies.
- Strapping and load protection - polypropylene, PET and steel strapping, corner boards and edge protection. See industrial packaging.
- Films and stretch wrap - stretch film, shrink film and barrier film, specified by gauge and containment force rather than by roll.
- Pallet consumables - layer pads, board tops and bases, shrink hoods and the film that holds a load to its pallet.
Supply and call-off into B77-B79
Consumption is usually more predictable than businesses expect. Twelve months of usage on a line list shows the pattern clearly enough to resupply against it rather than against a purchase order, which is the difference between managed supply and a series of small emergencies.
The mechanics are on packaging stockholding, and packaging stockholding in Tamworth covers how supply works across Tamworth specifically.
The line list is where to start
The quickest diagnostic at a bench is to look at what proportion of a typical pack is empty. Consistently above a third and the range, not the price, is where the money is going.
If you want that looked at properly rather than quoted like-for-like, a packaging review examines materials, storage, carriage, labour, damage and waste together.
The short version
- The outer, the protection and the consumables are three decisions, and most ranges only make one of them deliberately.
- Packaging at Dunstall Park is specified against the product and the journey, not chosen from a catalogue.
- Standard lines are trade quantities with no fixed minimum; run quantities apply to printed and bespoke work.
- One account covers outers, protection, sealing, print and pallet consumables.
- Stock is held around 40 minutes from Tamworth at Lutterworth and delivered into B77-B79.
Frequently asked questions
Can you look at what we currently buy?
Send the line list with rough usage. It usually shows whether the opportunity is specification, range or quantity - see packaging review and cost reduction.
Do you supply small units as well as large ones?
Yes. Standard lines are trade quantities with no fixed minimum, and printed or bespoke work is handled through call-off so a run quantity does not need your floor space.
Is there a minimum order for packaging at Dunstall Park?
Standard lines are supplied in trade quantities rather than against a fixed minimum. Printed and bespoke work comes in run quantities because the setup is spread across the run - which is where packaging stockholding earns its place.
Do we need a trade account?
It is the simplest way to run it, because it puts outers, protection, print, bespoke work and pallet consumables on one account and one invoice rather than four.
Do you supply pallet consumables as well as boxes?
Yes - stretch and shrink film, strapping, layer pads, corner and edge protection and board tops, on the same delivery as the outers. See industrial packaging.
Can we have our branding on the packaging?
Yes. Printed tape is usually the cheapest route because one setup brands every carton size you use - see custom printed tape.