
There is no single UK standard for box sizes, but there is a common trade range, much of it inherited from imperial sizes such as 305 x 229 x 229 mm (12 x 9 x 9 in). Sizes are written length x width x depth, normally as internal dimensions in millimetres. Choose from the product plus its protection, then check the external size against carrier bands.
How UK box sizes are written
Ask three suppliers for a "medium box" and you will be sent three different boxes. Size names mean nothing in the trade; the dimensions do. A UK carton is described as length x width x depth, in that order: length and width describe the opening, and depth runs from the base to the flaps. A 457 x 305 x 305 mm box and a 305 x 305 x 457 mm box hold the same volume, but the second is a tall box with a square opening. Getting the order wrong on a purchase order is a common reason a delivery turns out to be "the wrong size".
Many stock sizes look odd in millimetres because they began in inches: 305 mm is 12 inches, 229 mm is 9 and 457 mm is 18. That is why box sizes in cm come out as 30.5 x 22.9 x 22.9 rather than round numbers.
Internal versus external dimensions
Stock sizes are quoted as internal dimensions unless the supplier says otherwise, because that is what the product has to fit. External is what a carrier measures and what a pallet has to accommodate. The difference is the board: B flute single wall is around 2.5 to 3.0 mm thick, C flute 3.5 to 4.0 mm and BC double wall 6.0 to 7.0 mm.
As a working rule, external length and width are about two board thicknesses larger than internal, and depth about four on a standard flapped carton (FEFCO 0201), because the flaps fold over top and bottom. So a 305 x 229 x 229 mm box is roughly 6 mm larger on length and width outside in single wall, and 12 to 14 mm larger in double wall. Trivial on one box; decisive when a parcel sits close to a carrier threshold or a pallet edge.
Typical UK box sizes in mm and cm
The tables below are typical examples from the common trade range held in stock packaging supplies, not a fixed standard. Exact sizes vary between suppliers, and pack and pallet quantities are confirmed on the quote. The construction shown is what these sizes are usually bought in; the right grade for your goods follows weight and stack load, as set out in our corrugated board grades.
General despatch and removal-style cartons (typical internal sizes)
| Typical use | Internal size (mm) | Size (cm) | Usual construction |
|---|---|---|---|
| Small despatch, single items | 254 x 203 x 152 | 25.4 x 20.3 x 15.2 | Single wall |
| Small despatch, general | 305 x 229 x 229 | 30.5 x 22.9 x 22.9 | Single wall |
| Medium despatch | 457 x 305 x 305 | 45.7 x 30.5 x 30.5 | Single or double wall |
| Large cube | 457 x 457 x 457 | 45.7 x 45.7 x 45.7 | Double wall |
| Removal, small (books, heavy items) | 406 x 305 x 305 | 40.6 x 30.5 x 30.5 | Double wall |
| Removal, large (light, bulky items) | 610 x 457 x 457 | 61.0 x 45.7 x 45.7 | Double wall |
| Long items (rods, rolled goods) | 762 x 152 x 152 | 76.2 x 15.2 x 15.2 | Single or double wall |
The small removal-style box is small on purpose: filled with books it is already as heavy as most people should lift. The same logic applies to despatch, where a big box invites a heavy pack.
Postal box footprints (typical internal sizes)
| Fits | Paper size (mm) | Typical internal footprint (mm) | Typical depths |
|---|---|---|---|
| A6 items, cards, small accessories | 105 x 148 | 160 x 115 | Letterbox depth, 50 |
| A5 items, notebooks, small boxed goods | 148 x 210 | 220 x 160 | Letterbox depth, 50, 100 |
| A4 documents, prints, flat goods | 210 x 297 | 310 x 220 | Letterbox depth, 50, 100 |
| A3 prints, larger flat goods | 297 x 420 | 430 x 310 | 50, 100 |
"Letterbox depth" means shallow enough for a carrier's letterbox service. Each carrier sets its own limit and can change it, so check the current specification rather than relying on a box being sold as letterbox-friendly.
Pallet-module footprints (external)
The UK standard pallet is 1200 x 1000 mm and the Euro pallet 1200 x 800 mm. A footprint that divides evenly into the pallet builds a full layer with no gaps. Because 1000 and 800 share a 200 mm module, footprints built on 200 mm steps tend to tile both.
| External footprint (mm) | Per layer, 1200 x 1000 | Per layer, 1200 x 800 |
|---|---|---|
| 600 x 500 | 4 | Poor fit |
| 500 x 400 | 6 | Poor fit |
| 600 x 400 | 5 (mixed pattern) | 4 |
| 400 x 300 | 10 (mixed pattern) | 8 |
| 600 x 200 | 10 | 8 |
| 400 x 200 | 15 | 12 |
| 300 x 200 | 20 | 16 |
Specify the carton a few millimetres under the module rather than exactly on it. A carton that overhangs the pallet edge loses its corner support, and that is where crushing usually starts.
Choosing a size from the product and its protection
The internal size is the product plus its protection on every face, plus a little clearance. Measure the product at its largest points, add the protection allowance twice on each dimension, then look at the stock list. Our guide to choosing the right carton size covers the measuring; here is how it plays out against the trade range.
A 200 x 150 x 100 mm product needing 25 mm of protection on each face needs about 250 x 200 x 150 mm inside, which sits neatly in the 254 x 203 x 152 mm stock size. Make it fragile, needing 50 mm all round, and the requirement becomes 300 x 250 x 200 mm. The 305 x 229 x 229 mm box is now too narrow, and the next common size, 457 x 305 x 305 mm, has nearly three times the volume needed. The gap is filled with void fill and paid for in carriage.
Building a box ladder around your orders
A box ladder is the set of sizes you hold, each step chosen to cover a band of orders. It is a data exercise, not a catalogue exercise:
- Take a representative period of orders, including a peak, and record each packed size: product plus protection, or the combined footprint for multi-item orders.
- Sort by volume and look for clusters. Most order profiles bunch into a handful of groups.
- Size each step to the largest order in its group, not the average.
- Check each step's external size against your carrier bands and, for B2B lines, the pallet module.
- Write the ladder down, with which products go in which step.
Too few steps and every order ships with air; too many and you carry extra stock, crowd the bench and mispick boxes. The ladder belongs in the written pack specification, which is how packaging for fulfilment is set up.
Carrier size bands and volumetric weight
Parcel carriers price on bands defined by dimensions and weight, set variously by the longest side, by length plus girth or by all three dimensions, and many charge on the greater of actual and volumetric weight. Volumetric weight is length x width x height divided by a figure each carrier sets. Limits and divisors differ between carriers and change, so take them from each carrier's current specification.
- External dimensions count, measured on the packed parcel. An overfilled box bulges and measures larger.
- A few millimetres can move every order into the next band, and the cost repeats on every parcel in that step.
- Light goods in large boxes are charged as air. Moving from 305 x 229 x 229 mm (about 16 litres) to 254 x 203 x 152 mm (about 7.8 litres) roughly halves the volumetric weight, whatever the divisor.
This is why postal and parcel packaging is specified against the carrier bands you actually use, rather than picked from a size list.
When a made-to-size box beats a stock size
Stock sizes are the sensible default: no tooling, short lead times, easy reordering. A made-to-size carton earns its place when:
- The product falls between stock steps, as in the fragile example above.
- A high-volume line ships a few millimetres over a carrier threshold that a custom size would sit under.
- Movement is the failure mode, and a fitted box and insert would restrain it with less material than loose fill.
- B2B cartons need a clean pallet layer and no stock size fits the module.
It is not worth doing for low-volume lines, products that change often, or where a stock size already lands in the right band. Made-to-size cartons are produced to your specification for internal dimensions, board grade, flute and style, and sampled before the run.
Compare a made-to-size box with the stock box plus the void fill, packing time and carrier band it needs, not with the stock box on its own.
Get a box range specified against your orders
Send us your product sizes, your order profile and the carriers you use. We will specify a box ladder from the trade range, flag where a made-to-size carton would cost less delivered, and quote against that specification.
Frequently asked questions
What is the most common cardboard box size in the UK?
There is no single UK standard size. Typical general despatch sizes in the common trade range include 305 x 229 x 229 mm (12 x 9 x 9 in) and 457 x 305 x 305 mm (18 x 12 x 12 in), both inherited from imperial measurements. Exact stock sizes vary between suppliers.
Are box sizes quoted as internal or external dimensions?
Stock cartons are normally quoted as internal dimensions, length x width x depth, because that is the space the product has to fit. The external size is larger by the board thickness and is what carriers and pallets measure, so check which one a supplier means before you order.
How do I convert box sizes into cm?
Divide millimetres by ten, so 457 x 305 x 305 mm is 45.7 x 30.5 x 30.5 cm. If a size is listed in inches, multiply by 25.4 to get millimetres. Order in millimetres where you can, because rounding in centimetres can hide a few millimetres that matter.
What size box fits an A4 document or product?
A4 is 210 x 297 mm, so a postal box with an internal footprint of around 220 x 310 mm takes A4 flat with a little clearance. Choose the depth from the contents, and keep it shallow if letterbox delivery matters to you.
What box sizes fit a UK pallet?
External footprints that divide evenly into 1200 x 1000 mm build a clean pallet layer, for example 600 x 500, 400 x 200 or 300 x 200 mm. Footprints such as 400 x 200, 600 x 200 and 300 x 200 mm tile both the UK pallet and the 1200 x 800 mm Euro pallet.