
UK packaging EPR makes the businesses that supply packaged goods responsible for reporting, and in larger cases paying for, the packaging they put on the market. At the time of writing (November 2026), large producers pay PackUK disposal fees per tonne of each material; small producers register and report data only.
What EPR for packaging actually asks of you
Extended producer responsibility for packaging shifts the cost of dealing with packaging waste away from councils and towards the businesses that put packaging into the supply chain. If your business decides what goes around a product, or brings packaged goods into the UK, you carry part of the responsibility for that packaging once it has been used.
For most businesses the EPR packaging regulations are two jobs. The first is data: every obligated producer reports the packaging it supplies, by material and weight. The second, for large producers only, is cost: waste disposal fees per tonne of each material, set by PackUK, the scheme administrator. The first fees were for 2025, year 1 of the scheme.
Every figure here is correct at the time of writing (November 2026). Thresholds, fees and rules are reviewed, so check GOV.UK for the current position.
Large producer, small producer or neither
Two tests decide where you sit: your annual turnover, and the tonnage of packaging you are responsible for supplying in the UK each year. Both count. To be a large producer you have to exceed both large-producer thresholds at the same time.
| Category | Annual turnover | Packaging per year | What it means |
|---|---|---|---|
| Large producer | Over £2 million | Over 50 tonnes | Register, report packaging data and pay waste disposal fees |
| Small producer | Over £1 million | Over 25 tonnes | Above both small thresholds but not over both large ones: register and report data, no disposal fees |
| Generally not obligated | £1 million or under | 25 tonnes or under | Falling under either figure generally means no EPR obligation |
Thresholds at the time of writing (November 2026). Confirm them, and how they apply to groups of companies, in the GOV.UK guidance on whether you must comply with EPR for packaging.
The tonnage test is the one that catches people out. Fifty tonnes sounds a lot until you add up a year of corrugated outers, retail cartons, mailers, tape, void fill and pallet wrap. Work it out from purchase records and measured weights, and keep the workings.
Being below the fee threshold is not the same as being outside EPR: a small producer still registers and submits data. Large producers also carry obligations beyond fees, which the GOV.UK guidance sets out.
Which producer role you hold
EPR packaging compliance assigns responsibility by role, and one business can hold several roles for different packaging. The roles in the guidance are brand owner, packer/filler, importer, distributor, online marketplace and service provider.
- Brand owner: the business whose brand appears on the packaged goods.
- Packer/filler: the business that packs or fills goods into packaging.
- Importer: the business that brings packaged goods into the UK.
- Distributor, online marketplace and service provider: roles for businesses that supply packaging on, operate a marketplace that others sell through, or provide packaging as part of a service. GOV.UK defines each one precisely.
This matters when someone else does the packing. If a 3PL or co-packer packs your goods, the packaging still has to be reported by whichever business holds the role under the rules, and that is not automatically the business at the pack bench. Agree in writing who reports which packaging, and make sure the weights and materials reach them.
The packaging data you need to collect
The submission is the visible deadline, but the real work is in the data behind it. In practical terms you want the following for every packaging item you supply:
- the material, and for a pack made of more than one material, what each part is made of
- the weight per unit, measured rather than taken from a product description
- the number of units supplied in the period
- whether it is household or non-household packaging
- the producer role you hold for it
The household split deserves care, because the classification affects which packaging attracts disposal fees. The same carton sent to a trade customer and to a consumer's doorstep may need reporting differently. Ecommerce businesses, whose outers and mailers end up in household bins, should treat this as central rather than a detail.
Build a packaging register
The cleanest method is a packaging register: one line per component (carton, tape, void fill, film, label, insert, pallet wrap), with its material, measured weight and the SKUs or despatch types it is used on. Multiply by units shipped and you have tonnage by material. Supplier invoices give you quantities but rarely accurate weights, so weigh real samples on a bench scale and record the figure. If you have never broken a pack down this way, auditing each pack element by element is the same exercise and usually turns up material you did not need.
How packaging choices affect your fees
Because fees are charged per tonne per material, the levers are weight, material and, from year 2 (2026-27), recyclability. Extended producer responsibility packaging fees are now modulated by a recyclability assessment that rates packaging red, amber or green, and red-rated packaging pays more. The question shifts from what a box costs to buy to what it costs once it has been reported.
| Packaging choice | Effect on your EPR data | What to check first |
|---|---|---|
| Right-sizing the carton | Less board per despatch, so lower tonnage | Internal dimensions against the product, not the other way round |
| Lighter board where the stack allows | Lower weight per unit | Stack load decides board; never downgrade below what the journey needs |
| All-paper pack: carton, paper tape, paper fill | One material line, simpler to report and to assess for recyclability | That the paper option still protects the goods |
| Plastic tape on a corrugated carton | Adds a second material to the pack | Paper or water-activated gummed tape keeps it single-material |
| Plastic void fill or bubble wrap | A separate plastic line in your data | Paper fill or honeycomb where it protects |
| Pre-stretched pallet film | Less film per pallet for the same hold | Hand and machine film are different products |
Right-sizing comes first because it removes material, volumetric carriage and waste at once; our guide to choosing the right carton size covers the method. Keeping a corrugated pack single-material is often the next most useful change, and the tape is usually what breaks it, as our guide to packing tape grades explains.
None of this guarantees a lower fee. Rates differ by material and change between years, and a switch from plastic to paper can add weight even as it improves recyclability. A substitution that fails in transit is worse still, since the replacement despatch carries its own packaging. Make each decision with the reported weight and material in view, using recyclable and single-material packaging specified for the journey where it does the job, and saying plainly where it does not.
The packaging that costs least to report is the packaging you no longer need, which is why right-sizing comes before any material swap.
A practical plan for the next reporting period
- Confirm your category from last year's turnover and a tonnage figure built from purchase records.
- Map your producer roles, including packaging handled by a 3PL or co-packer.
- Build the packaging register and weigh real samples.
- Split household and non-household packaging by sales channel.
- Start with your heaviest lines and mixed-material packs, where a specification change moves the data most.
- Get material composition and unit weights from suppliers in writing, and file them.
We specify and supply packaging; we do not submit EPR returns. Where we help is the packaging itself: a packaging review that goes through what you use element by element, states the material and weight of each option, and says plainly where a lighter or single-material pack would not protect the goods. Read what a packaging review covers first if it is new to you.
This guide is general guidance, not legal or tax advice. Confirm your own obligations on GOV.UK or with a qualified adviser.
Get your packaging specification and your EPR data to agree
Tell us what you pack and how it travels. We will specify the options element by element, with material and weight stated for each, and tell you where a cheaper or lighter option will do and where it will not.
Frequently asked questions
Who has to pay EPR packaging fees in the UK?
At the time of writing (November 2026), large producers pay: businesses with annual turnover over £2 million that are also responsible for over 50 tonnes of packaging supplied in the UK each year. They pay waste disposal fees set per tonne per material by PackUK. Check GOV.UK for the current thresholds.
Do small producers have to do anything under packaging EPR?
Yes. A small producer, with turnover over £1 million and over 25 tonnes of packaging but not over both large-producer thresholds, must register and report packaging data. Small producers do not pay waste disposal fees.
What does the red, amber and green rating mean?
From year 2 of the scheme (2026-27), disposal fees are modulated by a recyclability assessment that rates packaging red, amber or green. Red-rated packaging pays more than the same weight of better-rated packaging.
Does my 3PL or co-packer report my packaging for me?
Not automatically. Responsibility follows the producer role, such as brand owner or importer, rather than whoever physically packs the order. Agree in writing who reports which packaging, and make sure the weights and materials reach that business.
Will switching from plastic to paper lower my EPR fees?
Not necessarily. Fees are charged per tonne per material, and a paper alternative can weigh more than the plastic it replaces. Compare the reported weight and material of each option, and only switch where the paper option still protects the goods.